2012 Trek Bikes Fuel Rumblefish Large
Build
700C/29 in × 2.3 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 623mm |
| Reach | 434mm |
| Stack to Reach Ratio | 1.44:1 |
| Seat Tube Length, C-T | 478mm |
| Top Tube Length, Effective/Horizontal Unknown | 605mm |
| Top Tube Slope | 16.1deg |
| Head Tube Angle | 69.8deg |
| Seat Tube Angle | 73.6deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 32mm |
| Bottom Bracket Height | 337.4mm |
| Chainstay Length Horizontal | 452mm |
| Front-Center | 705.7mm |
| Front-Center Horizontal | 705mm |
| Wheelbase | 1157mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 515mm |
| Trail | 81.6mm very high |
| Mechanical Trail | 76.6mm |
| Wheel Flop | 26.4mm |
| Standover Height | 784.4mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 161.3mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 162.4mm |
Rumblefish Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 738.8mm |
| Bike Length with Tires | 1895.8mm |
| Crank Length | 175mm |
| Handlebar Width | 690mm |
| Stem Length | 105mm |
| Stem Angle | 7deg |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | 122mm |
| Suspension Sag | 20% |
| Frame Material | Aluminum |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 178 cm to 185 cm |
Source:https://mtbdatabase.com/bikes/2012/trek/rumblefish/2012-trek-rumblefish-elite/