2018 Specialized Bicycles Enduro S-Works 29/6Fattie M
Build
700C/29 in × 2.3 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 606mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.38:1 |
| Seat Tube Length, Unknown | 430mm |
| Top Tube Length, Effective/Horizontal Center | 584mm |
| Top Tube Slope | 19.2deg |
| Head Tube Angle | 66deg |
| Seat Tube Angle | 76.7deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 19mm |
| Bottom Bracket Height | 350.4mm |
| Chainstay Length | 433mm |
| Chainstay Length Horizontal | 432.6mm |
| Front-Center | 757mm |
| Front-Center Horizontal | 757.4mm |
| Wheelbase | 1190mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 569mm |
| Trail | 108.7mm very high |
| Mechanical Trail | 99.3mm |
| Wheel Flop | 40.4mm |
| Standover Height | 769mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 217.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 180.4mm |
S-Works 29/6Fattie Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 738.8mm |
| Bike Length with Tires | 1928.8mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.specialized.com/us/en/s-works-enduro-296fattie/p/128931?color=240141-128931