2025 Unno Mith Race S1
Build
650B/27.5 in × 62 mm
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 624mm |
| Reach | 430mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, C-T | 420mm |
| Top Tube Length, Effective/Horizontal Unknown | 560mm |
| Head Tube Angle | 63.5deg |
| Seat Tube Angle, Unknown | 77deg |
| Head Tube Length | 107mm |
| Bottom Bracket Drop | 15mm |
| Bottom Bracket Height | 339mm |
| Chainstay Length | 450mm |
| Chainstay Length Horizontal | 449.8mm |
| Front-Center | 775.4mm |
| Front-Center Horizontal | 775.3mm |
| Wheelbase | 1225mm |
| Fork Offset/Rake | 44mm |
| Fork Length, Unknown | 584mm |
| Trail | 127.3mm very high |
| Mechanical Trail | 114mm |
| Wheel Flop | 50.9mm |
| Standover Height | 706mm |
| Tire to Pedal Spindle Distance With 155 mm cranks | 266.4mm |
| Pedal Spindle to Ground Clearance With 155 mm cranks | 184mm |
Race Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 62mm |
| Tire Outer Diameter | 708mm |
| Bike Length with Tires | 1933mm |
| Crank Length | 155mm |
| Handlebar Width | 800mm |
| Stem Length | 42mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
| Features | E-bike |
Source:https://www.unno.com/en-gb/mith/race