2025 BTR Fabrications Pinner 26 L
Build
26 in × 2.5 in
Insights
Somewhat aggressive stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 604.3mm |
| Reach | 480mm |
| Stack to Reach Ratio | 1.26:1 |
| Seat Tube Length, Unknown | 435mm |
| Top Tube Length, Effective/Horizontal Unknown | 630.8mm |
| Top Tube Slope | 17.3deg |
| Head Tube Angle | 63.5deg |
| Seat Tube Angle | 75.07deg |
| Head Tube Length | 140mm |
| Bottom Bracket Drop | 10mm |
| Bottom Bracket Height | 333mm |
| Chainstay Length Horizontal | 416.9mm |
| Front-Center | 821.1mm |
| Front-Center Horizontal | 821mm |
| Wheelbase | 1237.9mm |
| Fork Offset/Rake | 40mm |
| Fork Length (Axle-To-Crown) | 532mm |
| Trail | 126.3mm very high |
| Mechanical Trail | 113.1mm |
| Wheel Flop | 50.4mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 308.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 163mm |
26 Build
| Wheel Size | 26 inch (559mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 686mm |
| Bike Length with Tires | 1923.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.btr-fabrications.com/products/pinner-frame/#frame-options