2024 Kona Bicycle Company Process 134 G3 S
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Kona Bicycle Company Process 134
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 611mm |
| Reach | 430mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 380mm |
| Top Tube Length, Actual C-C | 572mm |
| Top Tube Slope | 25deg |
| Head Tube Angle | 65.5deg |
| Seat Tube Angle | 76.9deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 23mm |
| Bottom Bracket Height | 349mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434.4mm |
| Front-Center | 740mm |
| Front-Center Horizontal | 736.6mm |
| Wheelbase | 1171mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 551mm |
| Trail | 121.2mm very high |
| Mechanical Trail | 110.3mm |
| Wheel Flop | 45.7mm |
| Standover Height | 700mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 198mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 179mm |
G3 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1914.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 140mm |
| Rear Travel | 134mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Aluminum |
| Brake Type | Disc |
Source:https://en-ca.konaworld.com/products/process-134-dl-g3