2024 Giant Reign Advanced 1 M
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 632mm |
| Reach | 456mm |
| Stack to Reach Ratio | 1.39:1 |
| Seat Tube Length, C-T | 425mm |
| Top Tube Length, Effective/Horizontal HT Top | 587mm |
| Top Tube Slope | 21.7deg |
| Head Tube Angle | 63.5deg |
| Seat Tube Angle | 78.3deg |
| Head Tube Length | 105mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 339.5mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 443.6mm |
| Front-Center | 803.1mm |
| Front-Center Horizontal | 802.4mm |
| Wheelbase | 1246mm |
| Fork Offset/Rake | 44mm |
| Trail | 137.6mm very high |
| Mechanical Trail | 123.1mm |
| Wheel Flop | 54.9mm |
| Standover Height | 735mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 258.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 169.5mm |
1 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1995mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 171 cm to 180 cm |
Source:https://www.giant-bicycles.com/ca/reign-advanced-1-2024