2020 Yeti Cycles SB130 Not Lunch Ride MD
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 614.8mm |
| Reach | 460.2mm |
| Stack to Reach Ratio | 1.34:1 |
| Seat Tube Length, C-T | 410mm |
| Top Tube Length, Effective/Horizontal HT Top | 601.9mm |
| Head Tube Angle | 65.5deg |
| Effective Seat Tube Angle, ETT HT Top | 77deg |
| Head Tube Length | 99.2mm |
| Bottom Bracket Drop | 34.3mm |
| Bottom Bracket Height | 337.7mm |
| Chainstay Length Horizontal | 433mm |
| Front-Center | 773.4mm |
| Front-Center Horizontal | 772.6mm |
| Wheelbase | 1205.6mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 557.1mm |
| Trail | 121.2mm very high |
| Mechanical Trail | 110.3mm |
| Wheel Flop | 45.7mm |
| Standover Height | 725.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 231.4mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 167.7mm |
Not Lunch Ride Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1949.5mm |
| Handlebar Width | 760mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Source:https://yeticycles.com/en-us/bikes/sb130/geometry?srsltid=AfmBOorAGYl2H3jh0WwAPV_PGzrOXDJiaweXo7neVdXx2hdQodi2Dcx0