2008 Cannondale Bikes Prophet Base Small
Build
26 in × 2.3 in
Insights
Very aggressive stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Cannondale Bikes Prophet
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 520mm |
| Reach | 625mm |
| Stack to Reach Ratio | 0.83:1 |
| Seat Tube Length, C-T | 381mm |
| Top Tube Length, Effective/Horizontal HT Top | 547mm |
| Top Tube Slope | 13.5deg |
| Head Tube Angle | 67.5deg |
| Effective Seat Tube Angle, ETT HT Top | 73.5deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 0mm |
| Bottom Bracket Height | 337.9mm |
| Chainstay Length | 419mm |
| Chainstay Length Horizontal | 419mm |
| Front-Center | 756mm |
| Front-Center Horizontal | 670mm |
| Wheelbase | 1175mm |
| Wheelbase Max | 1190mm |
| Fork Offset/Rake | 45mm |
| Fork Length (Axle-To-Crown) | 533mm |
| Trail | 91.3mm very high |
| Mechanical Trail | 84.3mm |
| Wheel Flop | 32.3mm |
| Standover Height | 705mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 248.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 167.9mm |
Base Build
| Wheel Size | 26 inch (559mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 675.8mm |
| Bike Length with Tires | 1850.8mm |
| Crank Length | 170mm |
| Handlebar Width | 700mm |
| Stem Length | 70mm |
| Stem Angle | 8deg |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 140mm |
| Rear Travel | Unknown |
| Suspension Sag | 25% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 5 in to 5 ft 8 in |
Source:Cannondale.com/2008prophet4s