2024 Ibis Cycles Inc. Ripmo V3 Base XM (MX)
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 633mm |
| Reach | 478mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, C-T | 415mm |
| Top Tube Length, Actual C-C | 630mm |
| Top Tube Slope | 21.8deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 76.5deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 340.7mm |
| Chainstay Length | 433mm |
| Chainstay Length Horizontal | 432mm |
| Front-Center | 817.6mm |
| Front-Center Horizontal | 817mm |
| Wheelbase | 1249mm |
| Fork Offset/Rake | 46.4mm |
| Trail | 125.4mm very high |
| Mechanical Trail | 113.2mm |
| Wheel Flop | 48.7mm |
| Standover Height | 757mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 281.9mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 175.7mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1990.4mm |
| Crank Length | 165mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.ibiscycles.com/bikes/ripmo