2025 Cannondale Bikes Trail 2 XL
Build
700C/29 in × 2.25 in
Insights
Average stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of Cannondale Bikes Trail
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 641mm |
| Reach | 469mm |
| Stack to Reach Ratio | 1.37:1 |
| Seat Tube Length, C-T | 533mm |
| Top Tube Length, Effective/Horizontal HT Top | 659mm |
| Top Tube Slope | 11.8deg |
| Head Tube Angle | 68deg |
| Seat Tube Angle | 73.5deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 65mm |
| Bottom Bracket Height | 303.2mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 440.2mm |
| Front-Center | 754mm |
| Front-Center Horizontal | 751.8mm |
| Wheelbase | 1192mm |
| Fork Offset/Rake | 46mm |
| Trail | 99.1mm very high |
| Mechanical Trail | 91.9mm |
| Wheel Flop | 34.4mm |
| Standover Height | 839mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 215.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 133.2mm |
2 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.25in |
| Tire Outer Diameter | 736.3mm |
| Bike Length with Tires | 1928.3mm |
| Handlebar Width | 720mm |
| Stem Angle | 6deg |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 100mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 6 ft 0 in to 6 ft 3 in |
Source:https://www.cannondale.com/en-us/bikes/mountain/trail-bikes/trail/trail-2