2025 Yeti Cycles MTe Base LG
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 635mm |
| Reach | 480mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, Unknown | 440mm |
| Top Tube Length, Effective/Horizontal Center | 627mm |
| Top Tube Slope | 19.4deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 71.3deg |
| Effective Seat Tube Angle, ETT HT Top | 77deg |
| Head Tube Length | 115mm |
| Bottom Bracket Drop | 0mm |
| Bottom Bracket Height | 374.5mm |
| Chainstay Length | 449mm |
| Chainstay Length Horizontal | 449mm |
| Front-Center | 824mm |
| Front-Center Horizontal | 824mm |
| Wheelbase | 1273mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 576mm |
| Trail | 133.7mm very high |
| Mechanical Trail | 120.2mm |
| Wheel Flop | 52.7mm |
| Standover Height | 742mm |
| Tire to Pedal Spindle Distance With 160 mm cranks | 289.5mm |
| Pedal Spindle to Ground Clearance With 160 mm cranks | 214.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2022mm |
| Crank Length | 160mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | 25% |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
| Features | E-bike |
Published Sizing Recommendations
| Height | 178 cm to 191 cm |
Source:https://yeticycles.com/en-us/bikes/mte