2014 Intense Cycles Carbine 29 Base Small
Build
29mm BSD × 2.4 in
Insights
Very upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Intense Cycles Carbine 29
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 625mm |
| Reach | 394mm |
| Stack to Reach Ratio | 1.59:1 |
| Seat Tube Length, C-T | 406mm |
| Top Tube Length, Effective/Horizontal Center | 572mm |
| Top Tube Slope | 24.7deg |
| Head Tube Angle | 67deg |
| Seat Tube Angle | 72deg |
| Head Tube Length | 94mm |
| Bottom Bracket Drop | -273.5mm |
| Bottom Bracket Height | 349mm |
| Chainstay Length | 451mm |
| Chainstay Length Horizontal | 358.6mm |
| Front-Center | 830.8mm |
| Front-Center Horizontal | 784.4mm |
| Wheelbase | 1143mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 570mm |
| Trail | -23.4mm |
| Mechanical Trail | -21.5mm |
| Wheel Flop | -8.4mm |
| Standover Height | 819mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 585.3mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 179mm |
Base Build
| Wheel Size | 29mm BSD |
| Tire Width | 2.4in |
| Tire Outer Diameter | 150.9mm |
| Bike Length with Tires | 1293.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 160mm |
| Rear Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://intensecycles.com/pages/carbine-manuals