2025 Salsa Cycles Notch Carbon Small
Build
700C/29 in × 2.6 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 627mm |
| Reach | 467.9mm |
| Stack to Reach Ratio | 1.34:1 |
| Seat Tube Length, C-T | 405mm |
| Top Tube Length, Effective/Horizontal Center | 590.5mm |
| Top Tube Slope | 22.8deg |
| Head Tube Angle | 63.5deg |
| Seat Tube Angle | 78.9deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 17mm |
| Bottom Bracket Height | 360mm |
| Chainstay Length | 442.2mm |
| Chainstay Length Horizontal | 441.9mm |
| Front-Center | 821.4mm |
| Front-Center Horizontal | 821.2mm |
| Wheelbase | 1263.1mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 605mm |
| Trail | 138.8mm very high |
| Mechanical Trail | 124.2mm |
| Wheel Flop | 55.4mm |
| Standover Height | 758.8mm |
| Tire to Pedal Spindle Distance With 160 mm cranks | 284.4mm |
| Pedal Spindle to Ground Clearance With 160 mm cranks | 200mm |
Carbon Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 2017.2mm |
| Crank Length | 160mm |
| Handlebar Width | 780mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 180mm |
| Rear Travel | 170mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
| Features | E-bike |
Published Sizing Recommendations
| Height | 157 cm to 170 cm |
Source:https://www.salsacycles.com/products/notch-c-gx-eagle-transmission