2026 Forbidden Bike Co. Druid Core 1 S1
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 628mm |
| Reach | 430mm |
| Stack to Reach Ratio | 1.46:1 |
| Seat Tube Length, C-T | 400mm |
| Top Tube Length, Effective/Horizontal HT Top | 578mm |
| Top Tube Slope | 24.6deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 76.75deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 36.2mm |
| Bottom Bracket Height | 335.8mm |
| Chainstay Length Horizontal | 427mm |
| Front-Center | 767.9mm |
| Front-Center Horizontal | 767mm |
| Wheelbase | 1194mm |
| Fork Offset/Rake | 44mm |
| Fork Length (On-Axis) | 576mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Standover Height | 745mm |
| Tire to Pedal Spindle Distance With 150 mm cranks | 245.9mm |
| Pedal Spindle to Ground Clearance With 150 mm cranks | 185.8mm |
1 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1937.9mm |
| Crank Length | 150mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
| Features | E-bike |
Published Sizing Recommendations
| Height | 158 cm to 168 cm |
Source:https://forbiddenbike.com/bikes/druid-core/