2022 Yeti Cycles SB140 Mullet S
Build
2927mm BSD × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 603.7mm |
| Reach | 417.7mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, C-T | 380mm |
| Top Tube Length, Effective/Horizontal Center | 570.6mm |
| Top Tube Slope | 24.7deg |
| Head Tube Angle | 63.8deg |
| Seat Tube Angle | 75.8deg |
| Head Tube Length | 109.9mm |
| Bottom Bracket Drop | 1175.6mm |
| Bottom Bracket Height | 348.9mm |
| Chainstay Length | 433mm |
| Front-Center | 1190.1mm |
| Front-Center Horizontal | 185.4mm |
| Wheelbase | 1185mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 557.1mm |
| Trail | 701.1mm very high |
| Mechanical Trail | 629.1mm |
| Wheel Flop | 277.7mm |
| Standover Height | 718.2mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | -504.4mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 178.9mm |
Mullet Build
| Wheel Size | 2927mm BSD |
| Tire Width | 2.4in |
| Tire Outer Diameter | 3048.9mm |
| Bike Length with Tires | 4233.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://geometrygeeks.bike/bike/yeti-sb140-mullet-150mm-fork-2020/