2024 RAAW Mountain Bikes Jibb v2 Base M
Build
700C/29 in × 2.5 mm
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of RAAW Mountain Bikes Jibb v2
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Drop Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 635mm |
| Reach | 445mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, Unknown | 420mm |
| Top Tube Length, Effective/Horizontal Unknown | 607mm |
| Head Tube Angle | 64.5deg |
| Effective Seat Tube Angle, Unknown | 76deg |
| Seat Tube Exit Angle | 72deg |
| Head Tube Length | 115mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 278.5mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 443.6mm |
| Front-Center | 781.2mm |
| Front-Center Horizontal | 780.4mm |
| Wheelbase | 1224mm |
| Fork Offset/Rake | 44mm |
| Fork Length (On-Axis) | 567.7mm |
| Trail | 100.8mm very high |
| Mechanical Trail | 91mm |
| Wheel Flop | 39.2mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 297.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 108.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5mm |
| Tire Outer Diameter | 627mm |
| Bike Length with Tires | 1851mm |
| Suspension Type | Full suspension |
| Bar Type | Drop Bar |
| Fork Travel | 150mm |
| Rear Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 167 cm to 180 cm |
Source:https://raawmtb.com/pages/jibb-v2