2024 FRAMEWORKS Racing Enduro Base S
Build
650B/27.5 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of FRAMEWORKS Racing Enduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 637mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, Unknown | 360mm |
| Top Tube Slope | 29.1deg |
| Head Tube Angle | 63.75deg |
| Seat Tube Angle | 78.5deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 37mm |
| Bottom Bracket Height | 318.5mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 443.5mm |
| Front-Center | 787mm |
| Front-Center Horizontal | 786.1mm |
| Wheelbase | 1229.6mm |
| Fork Offset/Rake | 44mm |
| Fork Length, Unknown | 587.7mm |
| Trail | 126.3mm very high |
| Mechanical Trail | 113.2mm |
| Wheel Flop | 50.1mm |
| Standover Height | 727mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 261.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 148.5mm |
Base Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 711mm |
| Bike Length with Tires | 1940.6mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 160 cm to 172 cm |
Source:https://rideframeworks.com/pages/enduro-bike-frame