2024 Turner Bikes Venn Base S
Build
700C/29 in × 3 in
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Turner Bikes Venn
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 626mm |
| Reach | 405mm |
| Stack to Reach Ratio | 1.55:1 |
| Seat Tube Length, C-T | 390mm |
| Top Tube Length, Actual C-C | 585mm |
| Top Tube Slope | 26.1deg |
| Head Tube Angle | 67deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 70mm |
| Bottom Bracket Height | 317.2mm |
| Chainstay Length | 430mm |
| Chainstay Length Horizontal | 424.3mm |
| Front-Center | 696.3mm |
| Front-Center Horizontal | 692.7mm |
| Wheelbase | 1117mm |
| Wheelbase Max | 1142mm |
| Fork Offset/Rake | 47.6mm |
| Trail | 112.6mm very high |
| Mechanical Trail | 103.7mm |
| Wheel Flop | 40.5mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 139.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 147.2mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 3in |
| Tire Outer Diameter | 774.4mm |
| Bike Length with Tires | 1891.4mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Titanium |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 5 ft 2 in to 5 ft 6 in |
Source:https://turnerbikes.com/products/2024-venn