2024 Merida Bikes EONE SIXTY 10K MID
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 633mm |
| Reach | 459mm |
| Stack to Reach Ratio | 1.38:1 |
| Seat Tube Length, Unknown | 425mm |
| Top Tube Length, Effective/Horizontal Unknown | 589mm |
| Top Tube Slope | 21.7deg |
| Head Tube Angle | 64.4deg |
| Seat Tube Angle | 78.4deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 9mm |
| Bottom Bracket Height | 365.5mm |
| Chainstay Length | 446mm |
| Chainstay Length Horizontal | 445.9mm |
| Front-Center | 798.1mm |
| Front-Center Horizontal | 798.1mm |
| Wheelbase | 1244mm |
| Fork Offset/Rake | 36.2mm |
| Fork Length, Unknown | 581mm |
| Trail | 139.3mm very high |
| Mechanical Trail | 125.6mm |
| Wheel Flop | 54.3mm |
| Standover Height | 765mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 258.6mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 200.5mm |
10K Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1993mm |
| Crank Length | 165mm |
| Handlebar Width | 780mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 170mm |
| Rear Travel | 170mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
| Features | E-bike |
Source:https://www.merida-bikes.com/en-au/bike/4025/eone-sixty-10k