2024-V7 Kavenz VHP15 420ST 125HT L
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 644mm |
| Reach | 485mm |
| Stack to Reach Ratio | 1.33:1 |
| Seat Tube Length, C-T | 420mm |
| Top Tube Length, Effective/Horizontal Center | 613mm |
| Top Tube Slope | 22deg |
| Head Tube Angle | 65deg |
| Seat Tube Angle | 76.5deg |
| Effective Seat Tube Angle, Unknown | 78.5deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 26mm |
| Bottom Bracket Height | 346mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434.2mm |
| Front-Center | 816.2mm |
| Front-Center Horizontal | 815.8mm |
| Wheelbase | 1250mm |
| Fork Offset/Rake | 44mm |
| Trail | 124.9mm very high |
| Mechanical Trail | 113.2mm |
| Wheel Flop | 47.8mm |
| Standover Height | 793mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 279.2mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 181mm |
420ST 125HT Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1993.9mm |
| Crank Length | 165mm |
| Handlebar Width | 780mm |
| Stem Length | 30mm |
| Suspension Type | Full suspension |
| Bar Type | Swept Back Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | 25% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://kavenz.com/vhp15