2023 Intense Cycles tazer pro MD
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 631mm |
| Reach | 438.5mm |
| Stack to Reach Ratio | 1.44:1 |
| Seat Tube Length, C-T | 419mm |
| Top Tube Length, Unknown | 609mm |
| Top Tube Slope | 22.3deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 72.5deg |
| Effective Seat Tube Angle, Unknown | 74.9deg |
| Head Tube Length | 115mm |
| Bottom Bracket Drop | 8.3mm |
| Bottom Bracket Height | 368.7mm |
| Chainstay Length | 450mm |
| Chainstay Length Horizontal | 449.9mm |
| Front-Center | 785mm |
| Front-Center Horizontal | 784.1mm |
| Wheelbase | 1234mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 577.7mm |
| Trail | 123.3mm very high |
| Mechanical Trail | 111.3mm |
| Wheel Flop | 47.9mm |
| Standover Height | 816mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 243mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 203.7mm |
pro Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1988.1mm |
| Crank Length | 165mm |
| Handlebar Width | 800mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 155mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
| Features | E-bike |
Published Sizing Recommendations
| Height | 166 cm to 177 cm |
Source:https://eu.intensecycles.com/products/tazer-pro