2023 Identiti AKA 29, 120mm Fork L
Build
700C/29 in × 2.6 in
Insights
Average stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 628mm |
| Reach | 472mm |
| Stack to Reach Ratio | 1.33:1 |
| Seat Tube Length, Unknown | 470mm |
| Top Tube Length, Effective/Horizontal Center | 657mm |
| Top Tube Slope | 16.3deg |
| Head Tube Angle | 64.7deg |
| Seat Tube Angle | 73.7deg |
| Head Tube Length | 133mm |
| Bottom Bracket Drop | 50mm |
| Bottom Bracket Height | 327mm |
| Chainstay Length | 420mm |
| Chainstay Length Max | 435mm |
| Chainstay Length Horizontal | 417mm |
| Chainstay Length Horizontal Max | 432.1mm |
| Front-Center | 802mm |
| Front-Center Horizontal | 802mm |
| Wheelbase | 1219mm |
| Wheelbase Max | 1234mm |
| Fork Offset/Rake | 51.3mm |
| Fork Length, Unknown | 120mm |
| Trail | 121.5mm very high |
| Mechanical Trail | 109.8mm |
| Wheel Flop | 46.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 255mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 157mm |
29, 120mm Fork Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1973.1mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 185 cm to 198 cm |
Source:https://www.identitibikes.com/aka/