2023 Identiti AKA 29, 120mm Fork M
Build
700C/29 in × 2.6 in
Insights
Average stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 619mm |
| Reach | 452mm |
| Stack to Reach Ratio | 1.37:1 |
| Seat Tube Length, Unknown | 450mm |
| Top Tube Length, Effective/Horizontal Center | 639mm |
| Top Tube Slope | 17.9deg |
| Head Tube Angle | 64.7deg |
| Seat Tube Angle | 73.2deg |
| Head Tube Length | 122mm |
| Bottom Bracket Drop | 50mm |
| Bottom Bracket Height | 327mm |
| Chainstay Length | 420mm |
| Chainstay Length Max | 435mm |
| Chainstay Length Horizontal | 417mm |
| Chainstay Length Horizontal Max | 432.1mm |
| Front-Center | 777mm |
| Front-Center Horizontal | 777mm |
| Wheelbase | 1194mm |
| Wheelbase Max | 1209mm |
| Fork Offset/Rake | 50.7mm |
| Fork Length, Unknown | 120mm |
| Trail | 122.2mm very high |
| Mechanical Trail | 110.5mm |
| Wheel Flop | 47.2mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 230mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 157mm |
29, 120mm Fork Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1948.1mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 175 cm to 185 cm |
Source:https://www.identitibikes.com/aka/