2023 Carbonda FM1002 Base S
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 610mm |
| Reach | 432mm |
| Stack to Reach Ratio | 1.41:1 |
| Seat Tube Length, C-T | 380mm |
| Top Tube Length, Effective/Horizontal HT Top | 562mm |
| Head Tube Angle | 64.5deg |
| Effective Seat Tube Angle, ETT HT Top | 78deg |
| Head Tube Length | 105mm |
| Bottom Bracket Drop | 20mm |
| Bottom Bracket Height | 352mm |
| Chainstay Length | 440mm |
| Chainstay Length Horizontal | 439.6mm |
| Front-Center | 770mm |
| Front-Center Horizontal | 770.5mm |
| Wheelbase | 1210mm |
| Fork Offset/Rake | 51.5mm |
| Fork Length (Axle-To-Crown) | 572mm |
| Trail | 120.4mm very high |
| Mechanical Trail | 108.7mm |
| Wheel Flop | 46.8mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 228mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 182mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1953.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.carbonda.com/mountain/full-suspension/134.html