2024 V7 Kavenz VHP 16 Base S
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Kavenz VHP 16
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 639mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, C-T | 420mm |
| Top Tube Length, Effective/Horizontal Center | 578mm |
| Head Tube Angle | 64deg |
| Effective Seat Tube Angle, ETT HT Top | 77.5deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 34mm |
| Bottom Bracket Height | 338mm |
| Chainstay Length | 425mm |
| Chainstay Length Horizontal | 423.6mm |
| Front-Center | 786.1mm |
| Front-Center Horizontal | 785.4mm |
| Wheelbase | 1209mm |
| Fork Offset/Rake | 44mm |
| Fork Length, Unknown | 586mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Standover Height | 783mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 249.1mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 173mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1952.9mm |
| Crank Length | 165mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | NaNmm |
| Rear Travel | 160mm |
| Suspension Sag | 0% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://kavenz.com/vhp16