2024 RAAW Mountain Bikes Madonna v3 Base XL
Build
700C/29 in × 66 mm
Insights
Very upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of RAAW Mountain Bikes Madonna v3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 677mm |
| Reach | 505mm |
| Stack to Reach Ratio | 1.34:1 |
| Seat Tube Length, Unknown | 470mm |
| Top Tube Length, Effective/Horizontal Unknown | 647mm |
| Top Tube Slope | 19.5deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 145mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length | 455mm |
| Chainstay Length Horizontal | 453.7mm |
| Front-Center | 867.1mm |
| Front-Center Horizontal | 866.4mm |
| Wheelbase | 1320mm |
| Fork Offset/Rake | 44mm |
| Fork Length (On-Axis) | 587.7mm |
| Trail | 134.9mm very high |
| Mechanical Trail | 121.3mm |
| Wheel Flop | 53.2mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 320.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 66mm |
| Tire Outer Diameter | 754mm |
| Bike Length with Tires | 2074mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 186 cm to 199 cm |
Source:https://raawmtb.com/pages/madonna-v3