2011 Stevens Ridge Max Base S
Build
26 in × 26 mm
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 597.4mm |
| Reach | 403.1mm |
| Stack to Reach Ratio | 1.48:1 |
| Seat Tube Length, C-T | 406mm |
| Seat Tube Length, C-TTT | 359mm |
| Seat Tube Length, C-C | 339mm |
| Seat Tube Length, Effective Center | 594mm |
| Top Tube Length, Effective/Horizontal Center | 566mm |
| Top Tube Length, Actual C-C | 550mm |
| Top Tube Slope | 226deg |
| Head Tube Angle | 67deg |
| Seat Tube Angle | 73.5deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 270.5mm |
| Chainstay Length Horizontal | 437mm |
| Front-Center | 682.9mm |
| Front-Center Horizontal | 682mm |
| Wheelbase | 1119mm |
| Fork Offset/Rake | 37mm |
| Fork Length (Axle-To-Crown) | 508mm |
| Trail | 89.5mm very high |
| Mechanical Trail | 82.4mm |
| Wheel Flop | 32.2mm |
| Standover Height | 903.5mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 207.4mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 100.5mm |
Base Build
| Wheel Size | 26 inch (559mm BSD) |
| Tire Width | 26mm |
| Tire Outer Diameter | 611mm |
| Bike Length with Tires | 1730mm |
| Crank Length | 170mm |
| Handlebar Width | 680mm |
| Stem Length | 60mm |
| Stem Angle | 8deg |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 160mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.stevensbikes.de/2011/index.php?bik_id=1&cou=DE&lang=en_US§=geometry