2018 ICAN Cycling M17 Base 21
Build
700C/29 in × 2.3 mm
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of ICAN Cycling M17
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 635mm |
| Reach | 420mm |
| Stack to Reach Ratio | 1.51:1 |
| Seat Tube Length, C-T | 520mm |
| Top Tube Length, Effective/Horizontal Center | 615mm |
| Top Tube Slope | 13.5deg |
| Head Tube Angle | 70deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 253.3mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 440.9mm |
| Front-Center | 681mm |
| Front-Center Horizontal | 679.1mm |
| Wheelbase | 1120mm |
| Fork Offset/Rake | 46.8mm |
| Fork Length (Axle-To-Crown) | 508mm |
| Trail | 64.3mm mid/neutral |
| Mechanical Trail | 60.4mm |
| Wheel Flop | 20.7mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 197.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 83.3mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3mm |
| Tire Outer Diameter | 626.6mm |
| Bike Length with Tires | 1746.6mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://icancycling.com/collections/mtb-frame/products/29er-carbon-mtb-frame-m17