2018 ICAN Cycling M17 Base 19
Build
700C/29 in × 2.1 mm
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of ICAN Cycling M17
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 625mm |
| Reach | 413mm |
| Stack to Reach Ratio | 1.51:1 |
| Seat Tube Length, C-T | 480mm |
| Top Tube Length, Effective/Horizontal Center | 603mm |
| Top Tube Slope | 16.7deg |
| Head Tube Angle | 70deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 253.1mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 440.9mm |
| Front-Center | 669mm |
| Front-Center Horizontal | 667.1mm |
| Wheelbase | 1108mm |
| Fork Offset/Rake | 45.5mm |
| Fork Length (Axle-To-Crown) | 508mm |
| Trail | 65.5mm high |
| Mechanical Trail | 61.6mm |
| Wheel Flop | 21.1mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 185.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 83.1mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.1mm |
| Tire Outer Diameter | 626.2mm |
| Bike Length with Tires | 1734.2mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://icancycling.com/collections/mtb-frame/products/29er-carbon-mtb-frame-m17