2019 Nordest Cycles Bardino 2 Base M
Build
650B/27.5 in × 2.4 in
Insights
Average stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 632mm |
| Reach | 444mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, Unknown | 414mm |
| Top Tube Length, Effective/Horizontal Unknown | 621mm |
| Top Tube Slope | 22.8deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 75deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 55mm |
| Bottom Bracket Height | 298mm |
| Chainstay Length | 425mm |
| Chainstay Length Horizontal | 421.4mm |
| Front-Center | 777.5mm |
| Front-Center Horizontal | 775.6mm |
| Wheelbase | 1197mm |
| Fork Offset/Rake | 50.9mm |
| Fork Length (Axle-To-Crown) | 539mm |
| Trail | 112mm very high |
| Mechanical Trail | 101.1mm |
| Wheel Flop | 43.5mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 254.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 128mm |
Base Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 705.9mm |
| Bike Length with Tires | 1902.9mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 160mm |
| Suspension Sag | 20% |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.pinkbike.com/photo/18072087/