2023 Yeti Cycles SB140LR 29er XL
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Yeti Cycles SB140LR
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 635mm |
| Reach | 505mm |
| Stack to Reach Ratio | 1.26:1 |
| Seat Tube Length, C-T | 470mm |
| Top Tube Length, Effective/Horizontal Center | 652mm |
| Top Tube Slope | 16.1deg |
| Head Tube Angle | 65deg |
| Seat Tube Angle | 72.8deg |
| Effective Seat Tube Angle, Unknown | 77deg |
| Head Tube Length | 112mm |
| Bottom Bracket Drop | 33mm |
| Bottom Bracket Height | 341.5mm |
| Chainstay Length | 442mm |
| Chainstay Length Horizontal | 440.8mm |
| Front-Center | 835mm |
| Front-Center Horizontal | 836.2mm |
| Wheelbase | 1277mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 575mm |
| Trail | 126.1mm very high |
| Mechanical Trail | 114.3mm |
| Wheel Flop | 48.3mm |
| Standover Height | 739mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 290.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 171.5mm |
29er Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2026mm |
| Crank Length | 170mm |
| Handlebar Width | 780mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Swept Back Bar |
| Fork Travel | 160mm |
| Rear Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 185 cm to 201 cm |
Source:https://yeticycles.com/bikes/sb140