2023 V6 Kavenz VHP 16 Base XL
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 652mm |
| Reach | 500mm |
| Stack to Reach Ratio | 1.3:1 |
| Seat Tube Length, C-T | 450mm |
| Top Tube Length, Effective/Horizontal Center | 638mm |
| Head Tube Angle | 64deg |
| Effective Seat Tube Angle, ETT HT Top | 77.5deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 34mm |
| Bottom Bracket Height | 340.5mm |
| Chainstay Length | 425mm |
| Chainstay Length Horizontal | 423.6mm |
| Front-Center | 846.1mm |
| Front-Center Horizontal | 845.4mm |
| Wheelbase | 1269mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 581mm |
| Trail | 133.7mm very high |
| Mechanical Trail | 120.2mm |
| Wheel Flop | 52.7mm |
| Standover Height | 783mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 301.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 170.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2018mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://kavenz.com/vhp16