2023 Lo YT Industries Capra Core 1 M
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of YT Industries Capra
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 634mm |
| Reach | 447mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 420mm |
| Top Tube Length, Effective/Horizontal HT Top | 586mm |
| Head Tube Angle | 64.2deg |
| Effective Seat Tube Angle, Unknown | 77.6deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 27mm |
| Bottom Bracket Height | 347.5mm |
| Chainstay Length | 438mm |
| Chainstay Length Horizontal | 437.2mm |
| Front-Center | 791.3mm |
| Front-Center Horizontal | 790.8mm |
| Wheelbase | 1228mm |
| Fork Offset/Rake | 45.4mm |
| Trail | 130.6mm very high |
| Mechanical Trail | 117.6mm |
| Wheel Flop | 51.2mm |
| Standover Height | 737mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 246.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 177.5mm |
Core 1 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1977mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 170mm |
| Rear Travel | 170mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://us.yt-industries.com/products/bikes/capra/core-1/539/capra-29-core-1/?number=101964&variant=variant#tech|tech2