2018 Intense Cycles Carbine 29 Base XL
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 641mm |
| Reach | 471mm |
| Stack to Reach Ratio | 1.36:1 |
| Seat Tube Length, C-T | 483mm |
| Top Tube Length, Actual C-C | 675mm |
| Top Tube Slope | 16.7deg |
| Head Tube Angle | 65.5deg |
| Seat Tube Angle | 66deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 22.9mm |
| Bottom Bracket Height | 354.2mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 444.4mm |
| Front-Center | 808.9mm |
| Front-Center Horizontal | 808.6mm |
| Wheelbase | 1253mm |
| Fork Offset/Rake | 50.9mm |
| Trail | 115.9mm very high |
| Mechanical Trail | 105.5mm |
| Wheel Flop | 43.8mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 261.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 184.2mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 2007.1mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 155mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://enduro-mtb.com/en/intense-carbine-29-2018-review/