2021 Yeti Cycles SB130 Not Lunch Ride small
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Yeti Cycles SB130
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 612.1mm |
| Reach | 429.3mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 381mm |
| Top Tube Length, Effective/Horizontal HT Top | 571.5mm |
| Head Tube Angle | 65.5deg |
| Effective Seat Tube Angle, Seat Tube Top | 77.1deg |
| Head Tube Length | 94mm |
| Bottom Bracket Drop | 36.7mm |
| Bottom Bracket Height | 337.8mm |
| Chainstay Length Horizontal | 431.8mm |
| Front-Center | 742.6mm |
| Front-Center Horizontal | 741.7mm |
| Wheelbase | 1173.5mm |
| Fork Offset/Rake | 43.2mm |
| Fork Length (Axle-To-Crown) | 556.3mm |
| Trail | 123.2mm very high |
| Mechanical Trail | 112.1mm |
| Wheel Flop | 46.5mm |
| Standover Height | 723.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 198.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 167.8mm |
Not Lunch Ride Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1922.5mm |
| Handlebar Width | 780mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 1 in to 5 ft 7 in |
Source:https://yeticycles.com/bikes/sb130