2023 Yeti Cycles SB160 Base L
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Yeti Cycles SB160
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 625mm |
| Reach | 485mm |
| Stack to Reach Ratio | 1.29:1 |
| Seat Tube Length, Unknown | 440mm |
| Top Tube Length, Effective/Horizontal Center | 624mm |
| Top Tube Slope | 18.4deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 72.7deg |
| Effective Seat Tube Angle, Unknown | 77.5deg |
| Head Tube Length | 107mm |
| Bottom Bracket Drop | 22mm |
| Bottom Bracket Height | 352.5mm |
| Chainstay Length | 441mm |
| Chainstay Length Horizontal | 440.5mm |
| Front-Center | 829mm |
| Front-Center Horizontal | 829.6mm |
| Wheelbase | 1270mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 588mm |
| Trail | 133.7mm very high |
| Mechanical Trail | 120.2mm |
| Wheel Flop | 52.7mm |
| Standover Height | 750mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 284.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 182.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2019mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Swept Back Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 178 cm to 191 cm |
Source:https://yeticycles.com/bikes/sb160