2023 Yeti Cycles SB160 Base SM
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Yeti Cycles SB160
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 615mm |
| Reach | 435mm |
| Stack to Reach Ratio | 1.41:1 |
| Seat Tube Length, Unknown | 365mm |
| Top Tube Length, Effective/Horizontal Center | 571mm |
| Top Tube Slope | 26.1deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 72.1deg |
| Effective Seat Tube Angle, Unknown | 77.5deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 22mm |
| Bottom Bracket Height | 352.5mm |
| Chainstay Length | 437mm |
| Chainstay Length Horizontal | 436.5mm |
| Front-Center | 774mm |
| Front-Center Horizontal | 774.6mm |
| Wheelbase | 1211mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 588mm |
| Trail | 133.7mm very high |
| Mechanical Trail | 120.2mm |
| Wheel Flop | 52.7mm |
| Standover Height | 735mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 229.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 182.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1960mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Swept Back Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 155 cm to 170 cm |
Source:https://yeticycles.com/bikes/sb160