2020 Privateer Bikes 161 Base P3
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Privateer Bikes 161
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 643mm |
| Reach | 490mm |
| Stack to Reach Ratio | 1.31:1 |
| Seat Tube Length, C-T | 450mm |
| Top Tube Length, Effective/Horizontal Center | 603mm |
| Top Tube Slope | 19.4deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 80deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length | 446mm |
| Chainstay Length Horizontal | 445mm |
| Front-Center | 836mm |
| Front-Center Horizontal | 834mm |
| Wheelbase | 1279mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 590mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 294mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 2022.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 170mm |
| Rear Travel | 161mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 178 cm to 189 cm |
Source:https://geometrygeeks.bike/bike/privateer-161-2019/