2022 Ibis Cycles Inc. Ripmo V2 XT LARGE
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 628mm |
| Reach | 475mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, C-T | 432mm |
| Top Tube Length, Actual C-C | 632mm |
| Top Tube Slope | 19.8deg |
| Head Tube Angle | 64.9deg |
| Seat Tube Angle | 76deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 344.5mm |
| Chainstay Length Horizontal | 435mm |
| Front-Center | 803.6mm |
| Front-Center Horizontal | 803mm |
| Wheelbase | 1238mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 567mm |
| Trail | 126.8mm very high |
| Mechanical Trail | 114.9mm |
| Wheel Flop | 48.7mm |
| Standover Height | 740mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 254.1mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 169.5mm |
XT Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1987mm |
| Crank Length | 175mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 147mm |
| Suspension Sag | 28% |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 173 cm to 185 cm |
Source:https://www.ibiscycles.com/bikes/past-models/ripmo-v2