2022 Pipedream Cycles Moxie Mx3 Longish
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 642mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.46:1 |
| Seat Tube Length, C-T | 395mm |
| Top Tube Length, Effective/Horizontal HT Top | 580mm |
| Head Tube Angle | 64deg |
| Effective Seat Tube Angle, Unknown | 77.5deg |
| Head Tube Length | 105mm |
| Bottom Bracket Drop | 64mm |
| Bottom Bracket Height | 308mm |
| Chainstay Length | 425mm |
| Chainstay Length Max | 441mm |
| Chainstay Length Horizontal | 420.2mm |
| Chainstay Length Horizontal Max | 436.3mm |
| Front-Center | 780.5mm |
| Front-Center Horizontal | 777.9mm |
| Wheelbase | 1198mm |
| Wheelbase Max | 1214mm |
| Fork Offset/Rake | 50.3mm |
| Fork Length (Axle-To-Crown) | 552mm |
| Trail | 125.5mm very high |
| Mechanical Trail | 112.8mm |
| Wheel Flop | 49.4mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 238.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 138mm |
Mx3 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1941.9mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Suspension Sag | 25% |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Unknown |
| Features | Single-speed capable |
Published Sizing Recommendations
| Height | 150 cm to 173 cm |
Source:https://www.pipedreamcycles.com/shop/moxie/