2021 Salsa Cycles Cassidy Carbon, 29", 180mm Fork (Flip Chip High) Large
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 628mm |
| Reach | 484mm |
| Stack to Reach Ratio | 1.3:1 |
| Seat Tube Length, C-T | 455mm |
| Top Tube Length, Effective/Horizontal HT Top | 641mm |
| Head Tube Angle | 64.1deg |
| Effective Seat Tube Angle, ETT HT Top | 76deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 15mm |
| Bottom Bracket Height | 357mm |
| Chainstay Length | 431mm |
| Chainstay Length Horizontal | 430.7mm |
| Front-Center | 830.4mm |
| Front-Center Horizontal | 830.3mm |
| Wheelbase | 1261mm |
| Fork Offset/Rake | 43mm |
| Fork Length (Axle-To-Crown) | 589mm |
| Trail | 132.8mm very high |
| Mechanical Trail | 119.5mm |
| Wheel Flop | 52.2mm |
| Standover Height | 743mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 288.4mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 187mm |
Carbon, 29", 180mm Fork (Flip Chip High) Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 2004.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 180mm |
| Rear Travel | 165mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:www.salsacycles.com