2022 Salsa Cycles Blackthorn Carbon, 29", 160mm Fork (Flip Chip Low) Large
Build
700C/29 in × 2.4 in
Insights
Somewhat aggressive stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
Stack | 624mm |
Reach | 490mm |
Stack to Reach Ratio | 1.27:1 |
Seat Tube Length, C-T | 455mm |
Top Tube Length, Effective/Horizontal HT Top | 640mm |
Head Tube Angle | 64.6deg |
Effective Seat Tube Angle, ETT HT Top | 76.5deg |
Head Tube Length | 110mm |
Bottom Bracket Drop | 26mm |
Bottom Bracket Height | 346mm |
Chainstay Length | 432mm |
Chainstay Length Horizontal | 431.2mm |
Front-Center | 822.2mm |
Front-Center Horizontal | 821.8mm |
Wheelbase | 1253mm |
Fork Offset/Rake | 43mm |
Fork Length, Unknown | 569mm |
Trail | 129mm very high |
Mechanical Trail | 116.6mm |
Wheel Flop | 50mm |
Standover Height | 729mm |
Tire to Pedal Spindle Distance With 170 mm cranks | 280.2mm |
Pedal Spindle to Ground Clearance With 170 mm cranks | 176mm |
Carbon, 29", 160mm Fork (Flip Chip Low) Build
Wheel Size | 700C, 29 inch (622mm BSD) |
Tire Width | 2.4in |
Tire Outer Diameter | 743.9mm |
Bike Length with Tires | 1996.9mm |
Suspension Type | Full suspension |
Bar Type | Moto/Klunker/Riser Bar |
Fork Travel | 160mm |
Rear Travel | 140mm |
Suspension Sag | Unknown |
Frame Material | Carbon/Composite |
Fork Material | Aluminum |
Brake Type | Disc |
Source:www.salsacycles.com