2022 Diamondback Bicycles Hatch 3 Base MD
Build
650B/27.5 in × 2.25 in
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of Diamondback Bicycles Hatch 3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 617mm |
| Reach | 401mm |
| Stack to Reach Ratio | 1.54:1 |
| Seat Tube Length, C-T | 440mm |
| Top Tube Length, Effective/Horizontal Center | 590mm |
| Top Tube Slope | 20.3deg |
| Head Tube Angle | 69.5deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 289.2mm |
| Chainstay Length | 444mm |
| Chainstay Length Horizontal | 439.9mm |
| Front-Center | 659.8mm |
| Front-Center Horizontal | 657.1mm |
| Wheelbase | 1097mm |
| Fork Offset/Rake | 46mm |
| Trail | 81.4mm very high |
| Mechanical Trail | 76.3mm |
| Wheel Flop | 26.7mm |
| Standover Height | 785mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 135.7mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 114.2mm |
Base Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.25in |
| Tire Outer Diameter | 698.3mm |
| Bike Length with Tires | 1795.3mm |
| Crank Length | 175mm |
| Handlebar Width | 720mm |
| Stem Length | 90mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 7 in to 5 ft 10 in |
Source:https://www.diamondback.com/hatch-3-4732