2022 Ribble Cycles HT 725 Base X-Large
Build
650B/27.5 in × 2.6 in
Insights
Somewhat aggressive stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 626.5mm |
| Reach | 490.5mm |
| Stack to Reach Ratio | 1.28:1 |
| Seat Tube Length, C-T | 508mm |
| Top Tube Length, Effective/Horizontal HT Top | 670mm |
| Head Tube Angle | 64deg |
| Effective Seat Tube Angle, ETT HT Top | 74deg |
| Head Tube Length | 130mm |
| Bottom Bracket Drop | 43mm |
| Bottom Bracket Height | 315mm |
| Chainstay Length | 430mm |
| Chainstay Length Horizontal | 427.8mm |
| Front-Center | 800.3mm |
| Front-Center Horizontal | 799.2mm |
| Wheelbase | 1227mm |
| Fork Offset/Rake | 21.6mm |
| Trail | 150.6mm very high |
| Mechanical Trail | 135.3mm |
| Wheel Flop | 59.3mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 272.3mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 145mm |
Base Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 716.1mm |
| Bike Length with Tires | 1943.1mm |
| Handlebar Width | 800mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 6 ft 2 in to 6 ft 4 in |
Source:https://www.ribblecycles.co.uk/ribble-ht-725