2019 Cycles Devinci Troy LO 29 S
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 616mm |
| Reach | 425mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, C-T | 400mm |
| Top Tube Length, Effective/Horizontal HT Top | 582mm |
| Head Tube Angle | 66deg |
| Effective Seat Tube Angle, ETT HT Top | 75.7deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 32.5mm |
| Bottom Bracket Height | 339.5mm |
| Chainstay Length | 432mm |
| Chainstay Length Horizontal | 430.8mm |
| Front-Center | 735.9mm |
| Front-Center Horizontal | 735.2mm |
| Wheelbase | 1166mm |
| Fork Offset/Rake | 46.1mm |
| Trail | 115.2mm very high |
| Mechanical Trail | 105.2mm |
| Wheel Flop | 42.8mm |
| Standover Height | 720mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 194mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 169.5mm |
LO 29 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1909.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 160 cm to 170 cm |
Source:http://2019.devinci.com/bikes/bike_1056_scategory_274