2022 Nordest Cycles Bardino 3 Frame M
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 633mm |
| Reach | 443mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 405mm |
| Top Tube Length, Effective/Horizontal HT Top | 614mm |
| Top Tube Slope | 23.9deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 75.5deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 50mm |
| Bottom Bracket Height | 324.5mm |
| Chainstay Length | 425mm |
| Chainstay Length Horizontal | 422.1mm |
| Front-Center | 762.6mm |
| Front-Center Horizontal | 761mm |
| Wheelbase | 1183mm |
| Fork Offset/Rake | 36mm |
| Fork Length (Axle-To-Crown) | 539mm |
| Trail | 138.8mm very high |
| Mechanical Trail | 125.2mm |
| Wheel Flop | 53.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 218.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 154.5mm |
Frame Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1932mm |
| Stem Length | 40mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Suspension Sag | 20% |
| Frame Material | Steel |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 182 cm to 193 cm |
Source:https://nordestcycles.com/en/product/bardino-3-frame