2020/v3 Banshee Bikes Prime Low M
Build
700C/29 in × 2.3 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 630mm |
| Reach | 450mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, Unknown | 430mm |
| Top Tube Length, Effective/Horizontal HT Top | 600mm |
| Head Tube Angle | 65.5deg |
| Effective Seat Tube Angle, ETT HT Top | 76.7deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 339.4mm |
| Chainstay Length Horizontal | 450mm |
| Front-Center | 770.6mm |
| Front-Center Horizontal | 770mm |
| Wheelbase | 1220mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 557mm |
| Trail | 120mm very high |
| Mechanical Trail | 109.2mm |
| Wheel Flop | 45.3mm |
| Standover Height | 725mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 231.2mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 169.4mm |
Low Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 738.8mm |
| Bike Length with Tires | 1958.8mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 140mm |
| Rear Travel | 135mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 7 in to 6 ft 0 in |
Source:https://www.bansheebikes.com/prime-v3