2019 Salsa Cycles Horsethief 140 fork / flip chip high Small
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension trail mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 613mm |
| Reach | 415mm |
| Stack to Reach Ratio | 1.48:1 |
| Seat Tube Length, C-T | 406mm |
| Top Tube Length, Effective/Horizontal HT Top | 595mm |
| Head Tube Angle | 67deg |
| Effective Seat Tube Angle, Seat Tube Top | 73.6deg |
| Head Tube Length | 103mm |
| Bottom Bracket Drop | 26mm |
| Bottom Bracket Height | 346mm |
| Chainstay Length | 431mm |
| Chainstay Length Horizontal | 430.2mm |
| Front-Center | 709.3mm |
| Front-Center Horizontal | 708.8mm |
| Wheelbase | 1139mm |
| Fork Offset/Rake | 42mm |
| Fork Length (Axle-To-Crown) | 551mm |
| Trail | 112.3mm very high |
| Mechanical Trail | 103.3mm |
| Wheel Flop | 40.4mm |
| Standover Height | 759.5mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 167.3mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 176mm |
140 fork / flip chip high Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1882.9mm |
| Crank Length | 170mm |
| Handlebar Width | 750mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 140mm |
| Rear Travel | 120mm |
| Suspension Sag | 0% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 165 cm to 173 cm |
Source:https://salsacycles.com/bikes/archive/2019_horsethief_slx