2020 On-One Jack Flash 29er Base LRG
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of hardtail trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
Stack | 628mm |
Reach | 460mm |
Stack to Reach Ratio | 1.37:1 |
Seat Tube Length, C-T | 460mm |
Top Tube Length, Effective/Horizontal Unknown | 639.4mm |
Top Tube Slope | 17.6deg |
Head Tube Angle | 65deg |
Seat Tube Angle | 75deg |
Head Tube Length | 120mm |
Bottom Bracket Drop | 58mm |
Bottom Bracket Height | 312.7mm |
Chainstay Length | 445mm |
Chainstay Length Horizontal | 441.2mm |
Front-Center | 783mm |
Front-Center Horizontal | 781mm |
Wheelbase | 1222.2mm |
Fork Offset/Rake | 51mm |
Trail | 116.6mm very high |
Mechanical Trail | 105.7mm |
Wheel Flop | 44.7mm |
Tire to Pedal Spindle Distance With 170 mm cranks | 242.3mm |
Pedal Spindle to Ground Clearance With 170 mm cranks | 142.7mm |
Base Build
Wheel Size | 700C, 29 inch (622mm BSD) |
Tire Width | 2.35in |
Tire Outer Diameter | 741.4mm |
Bike Length with Tires | 1963.6mm |
Crank Length | 170mm |
Handlebar Width | 780mm |
Stem Length | 50mm |
Stem Angle | 7deg |
Suspension Type | Hardtail (Front suspension) |
Bar Type | Moto/Klunker/Riser Bar |
Fork Travel | 130mm |
Suspension Sag | Unknown |
Frame Material | Aluminum |
Fork Material | Unknown |
Brake Type | Disc |
Published Sizing Recommendations
Height | 5 ft 10 in to 6 ft 1 in |
Source:https://www.planetx.co.uk/i/q/CBPXJFSX/planet-x-jack-flash-29er-sram-sx-mountain-bike