2020/V3 Evil Bikes Following GX I9 HYDRA (130mm, LOW setting) SMALL
Build
700C/29 in × 2.4 in
Insights
Somewhat aggressive stack and reach vs trend of full-suspension trail mtb bikes
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 586mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.33:1 |
| Seat Tube Length, C-T | 381mm |
| Top Tube Length, Effective/Horizontal Unknown | 584mm |
| Top Tube Slope | 22.1deg |
| Head Tube Angle | 66.9deg |
| Seat Tube Angle | 76deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 36mm |
| Bottom Bracket Height | 336mm |
| Chainstay Length | 430mm |
| Chainstay Length Horizontal | 428.5mm |
| Front-Center | 727mm |
| Front-Center Horizontal | 727.5mm |
| Wheelbase | 1156mm |
| Fork Offset/Rake | 51mm |
| Fork Length, Unknown | 541mm |
| Trail | 103.2mm very high |
| Mechanical Trail | 94.9mm |
| Wheel Flop | 37.3mm |
| Standover Height | 652mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 185mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 166mm |
GX I9 HYDRA (130mm, LOW setting) Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1899.9mm |
| Crank Length | 170mm |
| Handlebar Width | 810mm |
| Stem Length | 45mm |
| Stem Angle | 0deg |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 130mm |
| Rear Travel | Unknown |
| Suspension Sag | 30% |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 3 in to 5 ft 8 in |
Source:https://www.evil-bikes.com/a/bikes/following